Removing and replacing the 8-SFF drive backplane
Procedure
1.
Power down the server (
on page 36).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
on page 37).
• Remove the server from the rack (
Remove the server from the rack
on page 37).
4.
Remove the access panel (
on page 39).
5.
Remove the fan cage (
Removing and replacing the fan cage
6.
7.
Removing and replacing the 8-SFF drive cage
on page 58).
8.
Remove the drive backplane.
To replace the component, reverse the removal procedure.
Removing and replacing the 2-SFF front drive cage
Procedure
1.
Power down the server (
on page 36).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
• Remove the server from the rack (
Remove the server from the rack
on page 37).
4.
Remove the access panel (
on page 39).
5.
on page 40).
6.
Disconnect all cables from the drive backplane.
7.
Remove the drive cage.
Removing and replacing the 8-SFF drive backplane
59
Summary of Contents for ProLiant DL380
