To replace the component, reverse the removal procedure.
Removing and replacing the 8-SFF drive cage
Procedure
1.
Power down the server (
on page 36).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
• Remove the server from the rack (
Remove the server from the rack
on page 37).
4.
Remove the access panel (
on page 39).
5.
on page 40).
6.
Remove the fan cage (
Removing and replacing the fan cage
on page 52).
7.
Disconnect all cables from the drive backplane.
8.
Remove the drive cage.
To replace the component, reverse the removal procedure.
58
Removing and replacing the 8-SFF drive cage
Summary of Contents for ProLiant DL380
