HP Enterprise ProLiant DL380 Maintenance And Service Manual Download Page 55

Page: 55 / 134

To replace the component, reverse the removal procedure.

Removing and replacing the SFF optical drive

Procedure

Power down the server (

Power down the server

on page 36).

Remove all power:

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

• Extend the server from the rack (

Extend the server from the rack

on page 37).

• Remove the server from the rack (

Remove the server from the rack

on page 37).

Remove the access panel (

Remove the access panel

on page 39).

Remove the fan cage (

Removing and replacing the fan cage

on page 52).

Disconnect all cables from the SFF universal media bay.

Remove the SFF universal media bay (

Removing and replacing the small form factor universal

media bay

on page 53).

Remove the optical drive.

Removing and replacing the SFF optical drive

Summary of Contents for ProLiant DL380







































































































































Search results

Summary of Contents for ProLiant DL380

Reviews:

Related manuals for ProLiant DL380

Brands by name

Popular brands

HP Enterprise ProLiant DL380, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL380

Reviews:

Related manuals for ProLiant DL380

Brands by name

Popular brands