IMPORTANT:
For optimum cooling, install fans in all primary fan locations.
For more information, refer to the fan locations table in the server user guide.
To replace the component, reverse the removal procedure.
Removing and replacing the FlexibleLOM
Procedure
1.
Power down the server (
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Disconnect the LAN segment cables.
4.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
on page 37).
• Remove the server from the rack (
Remove the server from the rack
on page 37).
5.
Remove the FlexibleLOM.
To replace the component, reverse the removal procedure.
Removing and replacing the small form factor universal
media bay
Procedure
1.
Power down the server (
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
Removing and replacing the FlexibleLOM
53
Summary of Contents for ProLiant DL380
