a.
Locate the Pin 1 indicator on the processor frame and the socket.
b.
Align the processor heatsink assembly with the heatsink alignment pins and gently lower it down until
it sits evenly on the socket.
The heatsink alignment pins are keyed. The processor heatsink assembly will only install one way.
Your heatsink may look different than the one shown.
c.
Using a T-30 Torx screwdriver, fully tighten each heatsink nut until it no longer turns.
CAUTION:
Be sure to tighten each screw fully in the order indicated. Otherwise, boot failure or intermittent
shutdowns might occur.
Removal and replacement procedures
79
Summary of Contents for ProLiant DL380
