49
GB
6.4 Ironing without steam
Sensitive fabrics are ironed at lower temper-
atures and without steam. In order to damp-
en them, the spray function is available.
1. Set the steam control
|
3
to
and the
temperature control
|
13
to
MIN.
2. Fill the water tank
|
10
if you wish to use
the spray function.
3. Place the steam iron on the base unit
|
9
.
4. Connect the mains plug
|
8
with the wall
socket.
5. Set the desired temperature using the
temperature controller
|
13
. The tempera-
ture control lamp
|
11
lights up.
6. Start ironing as soon as the ironing tem-
perature has been reached and the tem-
perature control lamp
|
11
goes out.
7. Finish ironing, set the temperature con-
troller
|
13
to
MIN
and pull out the
mains plug
|
8
.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank
|
10
through the filling open-
ing in the water tank (under the lid
|
2
).
6.5 Ironing with steam
Steam ironing requires a high temperature,
at least the temperature setting for
. In or-
der to additionally dampen items of cloth-
ing, the spray function is also available.
1. Set the steam control
|
3
to
and the
temperature control
|
13
to
MIN.
2. Fill the water tank
|
10
.
3. Place the steam iron on the base unit
|
9
.
4. Connect the mains plug
|
8
with the wall
socket.
5. Set the temperature controller
|
13
to the
desired temperature (at least
). The
temperature control lamp
|
11
lights up.
6. Once the ironing temperature has been
reached and the temperature control
lamp
|
11
goes out, set the steam con-
trol
|
3
to
and start ironing.
The steam will ...
… start to come out as soon as you hold
the steam iron horizontal, and
… stop as soon as:
- you hold the steam iron vertically,
- you place the steam iron on the base
unit
|
9
,
- the temperature is too low,
- the water tank
|
10
is empty
or
- Set the steam control
|
3
to
.
7. Finish ironing, set the temperature con-
trol
|
13
to
MIN,
the steam control
|
3
to
, and pull out the mains plug
|
8
.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank
|
10
through the filling open-
ing in the water tank (under the lid
|
2
).
6.6 Steam jet function
The steam jet function requires a high tem-
perature. Select a temperature setting be-
tween
and
MAX.
For this purpose, the
water tank
|
10
must be at least one quarter
full. The steam control
|
3
is set to the symbol
.
• Press the steam jet button
|
5
while the
steam iron glides over the item of laun-
dry.
• Wait a few seconds before you press
the steam jet button
|
5
again.
NOTE:
• For smoothing items of clothing that are
hanging up, you can use the steam jet
Button in a vertical position.
BB1$6B%XHJHOHLVHQB%ERRN6HLWH'LHQVWDJ-DQXDU
