47
GB
5. Before using for the
first time
1. Ensure that you have pulled out the
mains plug
|
8
.
2. Open the lid
|
2
(of the water tank).
3. Pour water into the measuring beaker
|
16
and half-fill the water tank
|
10
.
4. Insert the mains plug
|
8
into a wall sock-
et corresponding to the technical data.
5. Set the temperature controller
|
13
to
MAX.
The temperature control lamp
|
11
lights
up.
6. When the device has reached the de-
sired temperature (temperature control
lamp
|
11
goes out), iron an old cotton
cloth in steam mode until the water
tank
|
10
is empty.
6. Operation
DANGER!
~
The sole plate
|
15
becomes very hot
during operation. During operation
touch only the handle
|
6
and the control
elements of the steam iron.
~
Even during short interruptions, always
place the steam iron on the base unit
|
9
and never on its sole plate
|
15
. There is
a fire hazard!
NOTES:
• Not all materials are suitable for iron-
ing. Follow the care instructions, e.g. in-
side the clothing.
• You may notice an odour when using
for the first time. This is a result of the
manufacturing process and is not a de-
fect with the device. Ensure adequate
ventilation.
The sole plate
|
15
cools down slightly during
ironing. In order to reach the set temperature
again, the device heats the sole plate
|
15
up
again, during which the temperature control
lamp
|
11
is lit. The temperature control
lamp
|
11
goes out again when the set tem-
perature is reached. This process repeats it-
self during ironing.
Simply continue ironing during the heating
phase.
BB1$6B%XHJHOHLVHQB%ERRN6HLWH'LHQVWDJ-DQXDU
