M
ain
ten
an
ce
31
Lubrication
Gear Motor Lubrication
The Gear Motor is permanently lubricated and
does not normally require re-lubrication.
Speed Reducer Lubrication
All speed reducers are to be filled with Mobil
Glygoyle 460 Lubricant only.
When adding or changing oil for any reason, it
should be remembered that oils of various
types are not compatible with Mobil Glygoyle
460.
Proper oil level is maintained to the Allen head
setscrew on the horizontal center line of the
Speed Reducer. Oil should drain out when
setscrew is removed.
Add oil through top Allen head screw opening
until oil seeps out of centered screw opening.
Do not overfill.
Sleeve Bearing Lubrication
The bearings should be greased annually using
USDA approved food grade edible grease.
Typically, only one squirt of the grease gun is
required or until you feel resistance on the
pump.
Use caution to ensure the bearings is not over-
greased.
Over-greasing may “pop” the seal out of its
normal position.
If over-greased and the seal is popped out of
position, the excess grease will need to be
removed prior to re-installing the seal.
If seal is damaged due to over-greasing it may
need to be replaced.
Summary of Contents for HoweIce Rapid Freeze 4000-RL-CO 2DX
