Technical documentation
Subject to modifications
28 of 131
4.2. Transport and installation
4.2.1. Safety
The following safety instructions must be observed when transporting the plant - this will
prevent fatal injuries to persons and other damage to property.
The transport work is only allowed to be carried out by qualified persons in compliance
with the safety instructions - the following special qualifications are required: specialist
personnel for transport, specialist personnel for load securing.
Observe the transport instructions on the packaging.
Observe the prescribed storage conditions (e.g. temperature, air humidity).
Only use original packaging.
The plant is only allowed to be lifted at the holding points provided.
The specified position for the transport of the plant must be adhered to exactly.
Only the specified load-bearing and slinging equipment is allowed to be used to transport
the plant.
When selecting suitable load-bearing equipment, the total weight of the plant or plant
components must always be taken into account.
The transport route must always be secured by a third person.
The transport routes must be cordoned off and secured in such a way that no
unauthorised persons can enter the danger area.
Observe the permissible floor load for the transport route.
The packaging material must be disposed of properly.
The transport protection is only allowed to be removed after complete installation, during
commissioning.
Please also read chapter 2 "Safety instructions".
