33444-0-0414
Page 40
LIGHTING INSTRUCTIONS
1. STOP! Read the safety information on page 39.
2. Set the thermostat to lowest setting (if applicable).
3. Turn off all electric power to the appliance (if applicable).
4. Open control access panel (front panel).
5. Push in gas control knob slightly and turn clockwise
to OFF.
NOTE: Knob cannot be turned from "PILOT" to "OFF"
unless knob is pushed in slightly. Do
not force.
6. Wait ten minutes to clear out any gas.
Then smell for gas, including near the
floor. If you smell gas, STOP! Follow "B" in the safety
information on page 39. If you don't smell gas, go to
the next step.
7. Remove the pilot access cover located on the combus-
tion chamber.
8. Find pilot - follow metal tube from gas control. The
pilot is behind the pilot access cover.
9. Turn knob on gas control counterclockwise
to "PILOT."
10. Push in control knob all the way and hold in. Imme-
diately light the pilot with the Piezo Pilot Ignitor or a
match. Continue to hold the control knob in for about
one minute after the pilot is lit. Release knob, and
it will pop back up. Pilot should remain lit. If it goes
out, repeat steps 5 through 10.
• If knob does not pop up when released, stop
and immediately call your service technician
or gas supplier.
• If the pilot will not stay lit after several tries,
turn the gas control knob to "OFF" and call
your service technician or gas supplier.
11. Replace pilot access cover.
12. CAUTION: Pilot access cover must be kept tightly
closed during operation.
13. Turn gas control knob counterclockwise
to
"ON."
14. Replace control access panel (front panel).
15. Turn on all electric power to the appliance (if appli-
cable).
16. Set thermostat to desired setting (if applicable).
TO TURN OFF GAS TO APPLIANCE
1. Set the thermostat to lowest setting.
2. Turn off all electric power to appliance if service is to
be performed (if applicable).
3. Remove control access panel (front panel).
4. Push in gas control knob slightly and turn clock-
wise
to "OFF." Do not force.
5. Close control access panel (front panel).
PILOT
BURNER
THERMOPILE
