Mk4 Pairing Instructions
March 2016
Unique Perspectives Ltd.
www.housemate.ie ● [email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: +353 56 7725913 ● Fax: +353 56 7725936
Page 4 of 8
Step 4: Selecting the connection Method
The last step is to choose the connection method for future
connections. There are two choices: “
Wait for hardware
” or
“
Search and Connect
”.
“Wait for hardware” is the
recommended method for Mk3 and Mk4 devices. In this method
the hardware auto-reconnects to the phone when it is turned on
thus saving your phone’s battery life. The “Search and Connect”
method, though more reliable and quicker, uses more power as
the app is constantly searching for your hardware.
Rebooting for use with an iOS device.
To reboot your hardware for use with an iOS device you need to be connected to an Android.
1.
Make sure that you are connected and choose
Project
Settings->Preferences->Bluetooth Setup-
>Advanced Settings->Reboot for iOS
2.
Enter the password “apple”
3.
You will be asked to unpair the HouseMate HID Mouse
before the reboot can take place. This is because the HID
must be reconfigured as a bluetooth keyboard –
“HouseMate Switch”.
4.
The unit will emit a long beep and the red and orange
lights will illuminate. HouseMate is now ready for use
with an iOS device. Note that no InfraRed signals are
erased in this procedure.
Distributed by Technical Solutions Australia
tecsol.com.au
