Mk4 Pairing Instructions
March 2016
Unique Perspectives Ltd.
www.housemate.ie ● [email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: +353 56 7725913 ● Fax: +353 56 7725936
Page 6 of 8
Click on the
HouseMate Switch
entry to complete the pairing process. After a moment it
should move into the list of
My Devices
with the word
Connected
beside it.
Confirm that the blue LEDs on your HouseMate hardware are blinking.
Note:
If your device appears as
“
HouseMatePro Mk4”
at this stage then it is booted for
an Android device and will not work on an iOS. You will have to connect it to an Android
device and carry out the reboot procedure to switch it to iOS operation.
Step 2: Add New Switch
You are now ready to set up the HouseMate switch to drive the iOS
scanning. Navigate back to
Settings
and then choose
General-
>Accessibility->Switch Control->Switches->Add New Switch-
>External
and press your switch.
When the switch press is detected you will be prompted to enter a
name for the switch. Choose “HouseMate”.
Step 3: Choose a switch action
Now you must choose the switch action that will occur whenever
you press your switch. For scanning purposes this will be the
Select Item
action.
Under
Switches
choose the newly added HouseMate switch and
then choose the
Select Item
action.
Step 4: Enable & optimize Switch Control
This is the last step to set up the HouseMate switch to drive the iOS scanning. Navigate
back to Switch Control.
Distributed by Technical Solutions Australia
tecsol.com.au
