Mk4 Pairing Instructions
March 2016
Unique Perspectives Ltd.
www.housemate.ie ● [email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: +353 56 7725913 ● Fax: +353 56 7725936
Page 5 of 8
Using with an iOS device
The first step is to install the HouseMate app from the App Store. Search
for
“
HouseMate Home Control”.
After installation, open the app. The first time you launch the app it will
automatically open in technician mode. On future launches it is
necessary to press and hold the spanner icon in the bottom right of the
screen for 5 seconds to enter technician mode.
Setting up your device
Choose
Project->Setup your devices->HouseMate hardware-
>Pair your hardware
.
The Pairing wizard is presented. Read the
instructions carefully as these steps must be carried out manually
within the iOS Settings page.
If you intend to use the touch-screen only then you can click
Skip
and jump to step 5 below.
Step 1: Pairing the HouseMate Switch
The first step is to pair the HouseMate Switch. This switch is used to drive the iOS scanning.
When you are ready choose
Settings
and you will be brought to the iOS Settings page.
Navigate to
Settings->Bluetooth
. Turn on Bluetooth and then turn on your HouseMate
hardware by pressing it’s switch. After a moment you should see
HouseMate Switch
appear.
Distributed by Technical Solutions Australia
tecsol.com.au
