Hottek HT-964-200, User Manual, Page: 16 / 28

ENG
16
• Slowly lead the hair clipper working upwards through the hair.
2 – Back of the head
• Switch the device off and set the next longer 6.3 or 6.4 (9 mm or 12
mm) comb and cut the back of the head.
3 – Side of the head
• Switch the device off and set 6.1 or 6.2 (3 mm or 6 mm) comb
depending on the hair length and cut the temples.
• Set 6.3 or 6.4 (9 mm or 12 mm) comb and continue to cut hair to the
top of the hair.
4 – Top of the head
• Set 6.3 or 6.4 (9 mm or 12 mm) comb and start to cut top of the head.
• It is recommended to cut hair from back to front against the direction
of normal hair growth.
• You may also cut along the direction of normal hair growth.
• Please note that haircut against the direction of normal hair growth will
be shorter than those cut along the direction of normal hair growth.
• 6.1 or 6.2 (3 mm or 6 mm) combs are used to achieve a short haircut.
• Hold the hair between the finders and cut it to desired length.
• Use the barber comb to simplify the process.
• Cut over the barber comb and cut it.
• Changing the strand length, you will enjoy the desired haircut.
• Always start from back of the head.
• Comb out trimmed hair and check for uneven strands.
5 – Finishing touches
• Use the hair clipper without an attachment comb for close trimming
around the head.
• To get a clean line around the neck and temples, set the blade
adjustment level in the down position.
• Reverse the hair clipper.
• Press the hair clipper at a right angle to the head, tips of the blades
lightly touching the skin and cut the shortest hair.
• You may even the longer hair using a razor.