Hotsy HSS • #8.914-412.0 • Rev. 10/11
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
10
The five color-coded quick connect
nozzles provide a wide array of
spray widths from 0° to 40° and are
easily accessible when placed in the
convenient rubber nozzle holder,
which is provided on the front of
the machine.
NOTE: For a more gentle rinse,
select the white 40° or green 25°
nozzle. To scour the surface, select
the yellow 15° or red 0° nozzle. To
apply detergent select the black
nozzle.
WARNING! Never replace
nozzles without engaging the
safety latch on the spray gun
trigger.
Safety
Latch
OPERATING INSTRUCTIONS
STEP 1: Check engine oil level. Oil level should be level with the bottom of the oil filler neck. (Refer to the engine's
operating manual included with machine.) We recommend that the oil be changed after the first 5 hours of use,
then once every 50 hours.
NOTE: Improper oil levels will cause low oil sensor to shut off engine. IMPORTANT!
Do not run engine with high or low oil levels as this will cause engine damage.
STEP 2: Fill engine fuel tank with
fuel.
Oil Dipstick
Fuel
Tank
STEP 3: Before installing nozzle,
trigger the spray gun to eliminate
trapped air then wait for a steady
flow of water to emerge from the
wand coupler when engine starts.
Run machine allowing water to flush
through the system until clear.
STEP 4: Read engine operators
manual before starting. Turn the
engine switch to "Start" position.
Engine
On-Off
Switch
Oil Filler Cap
NOZZLES
Oil Filler Cap
Nozzles
