Hotsy HHD 3.4/30 D, Operator'S Manual

Page: 15 / 98

• 9.808-131.0 • Rev. 01/19
15
PRESSURE W
ASHER
OPERA
TOR’S MANU
AL
TROUBLESHOOTING
For Models: HHD 5/30 G, HHD 6/30 G, HHD 8/30 G, HHD 3.4/30 D
PROBLEM POSSIBLE CAUSE SOLUTION
LOW OPERATING
PRESSURE
Faulty pressure gauge Install new gauge.
Insufficient water supply. Closed
faucet. Inlet hose kinked Use larger supply hose; clean filter at water
inlet. Open faucet.
Clogged inlet hose strainer
Check plumbing system for leaks. Retape
leaks with teflon tape.
Old, worn or incorrect spray nozzle
Match nozzle number to machine and/or
replace with new nozzle.
Belt slippage Tighten or replace; use correct belt.
Plumbing or hose leak
Check plumbing system for leaks. Re-tape
leaks with teflon tape.
Faulty or mis-adjusted unloader
valve Adjust unloader for proper pressure. Install
repair kit when needed.
Worn packing in pump
Install new packing kit. Call Dealer Customer
Support.
Fouled or dirty inlet or discharge
valves in pump
Clean inlet and discharge valves.
Machine has been stored in
freezing temperatures Thaw out machine completely, including
hose, spray gun and wand.
Worn inlet or discharge valves Replace with valve kit.
Obstruction in spray nozzle Remove obstruction.
Leaking pressure control valve Rebuild or replace as needed.
Slow engine RPM Set engine speed at proper specifications.
Pump sucking air
Check water supply and possibility of air
seepage.
Valves sticking Check and clean or replace if necessary.
Unloader valve seat faulty Check and replace if necessary.
FLUCTUATING
PRESSURE
Worn or dirty pump valves Call local distributor.
Nozzle is obstructed Blow out or remove debris with fine needle.
Pump sucking air, inlet hose
leaking Check that all hoses and fittings are airtight.
Turn off machine and trigger spray gun until
a steady flow of water emerges through the
nozzle.
Insufficient water supply Turn water on full force. Check garden hose
for kinks, leaks or blockage.
PRESSURE LOW
AFTER PERIOD OF
NORMAL USE
Nozzle worn Replace nozzle.
Unloader valve worn Replace unloader valve.
ENGINE WILL NOT
START OR STOPS
WHILE OPERATING
Low oil shutdown Fill engine with oil.
Out of gas Fill fuel tank.
Water in gasoline Drain gas tank; fill with clean fuel.