Copyright 2013 HotSpot Energy
INDOOR UNIT INSTALLATION
1. Pass the piping through the hole in the wall. See
figure 9.
2. Hook the indoor unit onto the upper portion of
installation plate (Engage the indoor unit with the upper
edge of the installation plate). Ensure the hooks are
properly seated on the installation plate by moving it in
left and right motions.
3. Piping can be made by easy by supporting the indoor
unit with a cushioning material between the indoor unit
and the wall. Remove it after finishing the piping. See
figure 10
4. Press the lower left and right side of the unit against
the installation plate until hooks engages with their
slots.
Figure 9
Figure 10
9