background image

Door Locked Indicator...‘Red Keyhole’ symbol
The ‘Red Keyhole’ symbol       will illuminate 2 seconds after
you have pressed the ‘Start’ button and will remain lit
throughout the wash programme.
The ‘Red Keyhole’ symbol will be flashing at the end of the
programme to indicate that the door is still locked. When the
symbol stops flashing you will hear a bleep and the door can
then be opened.

Door not closed
If the ‘Red Keyhole’ symbol is flashing at the beginning of
the wash programme, the door has not been closed properly
and the programme will not start. Ensure that the door is
closed properly by pushing it until you hear the catch click.

WARNINGS:

Do not try to 
open the 
door during 
the wash
programme.

Do not allow 
children to 
play with the 
machine or 
tamper with 
the controls.

If you cancel a
programme 
part way 
through a 
wash or there 
is a power 
cut, take care 
when         
opening the 
door. The 
machine may 
contain hot 
water.

This machine 
has a Child 
Lock feature,
which when 
activated     
disables all 
controls (see 
‘Options’).

Progress
indicators

Wash programmes

PR
OGR

AMMES

AND  OPTIONS

15

On-Off / Selecting a wash programme
Switch the machine ‘On’ by pressing the ‘Start’ button or by
pressing the button of the wash programme you require.
To begin the selected programme press ‘Start’. In order to
switch the machine off at the end of the wash programme
press the ‘Cancel/Stop’ button.

To pause a programme
Press the ‘Cancel/Stop’ button once. The ‘Start’ progress
status light will flash to indicate the selected programme is
paused.
To continue press the ‘Start’ button.

To change a programme
Press the ‘Cancel/Stop’ button once. The ‘Start’ progress
status light will flash to indicate the selected programme is
paused. By pressing the same button again the programme
will be cancelled and ‘On’ will appear in the display window.
A different programme can now be selected by pressing the
required programme button. Press the ‘Start’ button to
begin the new programme.

The progress status lights
This set of lights indicate what stage in the wash cycle
the selected programme has reached.
These will initially appear dimmed when you choose a
programme and each light will become brighter when
that stage of the wash cycle is running.

‘Cancel/Stop’ button

‘Start’
button

Programme selection buttons

Summary of Contents for Ultima WMA64





























Reviews: