background image

20

Options

PR

OGR

AMMES

& OPTIONS

Any of the following optional wash features can be selected after the wash programme
selection, with the exception of ‘Fast Forward’, which can only be activated after the wash
programme has started.

To choose an optional wash feature, press the option button once or in some cases scroll
through the options given in the display window.

How Dirty

This option allows the washing machine to take into account how dirty the
washing is. You can select ‘Normal’,‘Heavy’ or ‘Light’ load soil level and the
selected wash programme is modified accordingly.
This option is set automatically to ‘Normal’ soiling which will be displayed adjacent to
the ‘How Dirty’ button. Repeated pressing of the ‘How Dirty’ button allows you to
scroll through the ‘Normal’,‘Heavy’ and ‘Light’ soiling settings. When you select the
‘Heavy’ option, the machine will automatically do a pre-wash prior to your chosen
programme. You will therefore need to add detergent to the pre-wash compartment
in addition to the main wash compartment.
This is not available with the Rinse and Spin programmes.
Also ‘Heavy’ soiling cannot be selected for the Wool, Silk and Handwash
programmes.
On the Fast Wash programme only ‘Light’ soiling is available

Pre Wash

This option provides a short wash cycle, at 30˚, before the selected wash
programme starts. It is used to loosen the heavy soil deposits on clothes.
It is recommended that detergent is also used in the Prewash compartment.
To use this option press the ‘Pre-Wash’ option button once and           illuminates in
the display window above the ‘Pre-Wash’ option button.
Press again to cancel the option.
This option is not available with Wool, Silk, Handwash, Fast Wash and the Rinse
and Spin programmes.

Mini Load

Select this option for washing a smaller load.
In addition to reducing actual washing time, this option will reduce the water
and energy consumption by up to 50%.
To use this option, press the ‘Mini Load’ option button once and           illuminates in
the display window above the ‘Mini Load’ option button.
Press again to cancel the option.
Note: You can reduce the amount of detergent you use with this wash.
This option is available with all programmes.

Reduce Creases

This option reduces the wash action and spin speed for delicate clothes.
To use this option press the ‘Reduce Creases’ option button once and
illuminates in the display window above the ‘Reduce Creases’ option button.
Press again to cancel the option.
This option is not available with Cotton, Wool and Handwash.

Option buttons

Summary of Contents for Ultima WMA64





























Reviews: