background image

Sort your laundry into groups by washcare labels.
Load the machine, making sure that clothes are not trapped
in the door. Close the washing machine door by pushing it
until it clicks.

Press ‘Start’ to begin the wash
programme. During the wash, the
programme status lights will glow
brightly to indicate at what stage
in the cycle the programme has
reached.
The ‘Time to End’ displayed will
count down the programme time
to the end of the programme.

3

1

4

5

2

6

WARNINGS:

Do not allow
children to
play with the
machine or
tamper with
the controls.
This machine
has a Child
Lock feature,
which when
activated
disables all
controls (see
‘Options’).

Do not
overload the
machine!  It
may damage
laundry and
reduce the
quality of 
the wash.

Do not try to 
open the door  
during the 
wash     
programme.

Do not open 
the dispenser 
drawer         
during any  
programme.

In the unlikely 

event of 
something 
not working 
see the 
Trouble-
shooting
section.

At the end of the wash programme
the ‘End’ light will glow and remain
lit. Also a ‘Red Keyhole’

will flash

indicating the door is locked. The
machine will bleep and the light
will go out when the door can be
opened.

7

8

A typical wash programme

12

Select the programme you require.
You will hear a bleep and the 
programme temperature will 
illuminate in the display window
and after 2 seconds the 
programme length,‘Time to End’,
will be displayed. Also, dimmed
wash progress status lights will
appear for the chosen programme.

Select any optional wash feature(s)
that you may require by pressing
the appropriate button(s),
indicator lights will show what you
have chosen.

Switch the machine off by pressing
the ‘Cancel/Stop’ button.
We also recommend that you
switch off the electricity and water
supply.

Add detergent and fabric       
conditioner, if required, to the 
dispenser drawer.
Refer to the detergent
manufacturer’s dosage 
instructions.

Switch the machine on by pressing
Start’.
You will hear a bleep and ‘On’ will
illuminate in the display window.

A T

YPIC

AL W

ASH

PR

OGR

AMME

Summary of Contents for Ultima WMA64





























Reviews: