![Hotpoint K964GP Use And Care Manual Download Page 9](http://html.mh-extra.com/html/hotpoint/k964gp/k964gp_use-and-care-manual_2167204009.webp)
Features of Your Lower Oven Touch Control Panel
Touch controls for your
Lower Oven will not operate
until the digital clock has
been set.
1. DISPLAY. Displays time of
day.
or temperature during
cooking. cooking mode and tells
you
next.
Note: Time on the microwave
display is shown in minutes and
seconds (
is one minute, 30
seconds). On the lower oven, time
is shown in hours and minutes
( I
is one hour,
minutes),
2.
you broil at full
power by touching BROIL and
START
Lets you select Lo
Broil for longer, slower broiling.
3. BAKE. Used to set oven to
4. COOK TIME. Use to enter
time required for
automatic
or roasting.
5. STOP TIME. Use when baking
or cleaning to enter the time of day
you want oven to turn off.
CLOCK. Touch this pad to
or check time of
when display is showing other
i
7. INCREASE. Short taps to this
increase time or temperature
by small amounts. Press& hold
to increase time or temperature
by larger amounts.
DECREASE. Short taps to this
decrease time or temperature
by
amounts. Press & hold
to decrease time or
temperature by
amounts.
CLEAN. Use for Self-Cleaning
mode. Lets you enter length of
cleaning operation.
lo. START. Must be touched to
any cooking or cleaning
11.
Cancels
all programs except
and
Minute/Second Timer. Also
stops oven signals and stops
self-cleaning
12. TIMER. Lets you time any
kitchen function.
13. OVEN LIGHT. Touch this
pad to turn oven
on and off.
How to Recall a Setting
If you want to check the setting for
any function (such as Bake or
Broil), press the pad and it will
appear briefly.
To change the baking time,
touch the COOK TIME pad
immediately enter a new time.
Then press START.
If you want to change the setting,
-
press the pad and immediately
enter the new setting. Then press
the START pad.
For example, to check a baking
time that you set, touch the COOK
TIME pad, and the time
show briefly.
To change the time of day,
other functions, including the
timer, must be off.
Note: During Recall, the
active function is not affected
until you make a change and
press START.
If “F-” and number flash
on display,
have a
function error code.
CLEAR/OFF
error code does not
disconnect power
and call
service.
I
Summary of Contents for K964GP
Page 37: ...37 ...
Page 38: ...Notes 38 ...