Hotpoint K964GP, Use And Care Manual

Page: 10 / 40

How to Set Your Digital Clock and Timer
Clock
electronic digital clock on
your cooking center is an
accurate solid-state device.
MUST BE SET BEFORE
CONTROLS FOR
OVEN WILL WORK.
power is first connected to
your cooking center or after
of any kind, the
display on both the
microwave lower oven control
shows lighted 8’s and 18’s
pills all oven functions for about
I 5 seconds.
all lights off
“RESET” appears in the upper
display, and “PF” (for Power
appears in the lower oven
display.
Touch the pad on the
upper touch control panel and the
microwave oven is ready to use.
How to Set the Clock
Quick Set-Clock
1. Press CLOCK pad.
2. Press INCREASE or
DECREASE pad to enter
the time.
3. Press START pad.
Before using the lower oven,
the digital clock must be set
as follows:
Step 1: Touch the CLOCK pad,
Step
2: Press INCREASE or
DECREASE pad to set the time
of day.
Example: Try setting the time for
three o’clock. Use a combination
of presses and taps to get familiar
with the control. Since this is a
hour clock, there is no need to
worry about AM or PM.
If you accidentally go past three
o’clock, simply press the
DECREASE pad until the time
shows in the display.
“SET TIME” will flash for 3
seconds after you release the
INCREASE or DECREASE pad,
then “START” will flash. “SET
TIME” will reappear if you touch
the INCREASE or DECREASE
pad again, and you can continue to
change the time setting.
Step
3: Touch the START pad.
This enters the time and starts
the
If “PF” appears in the display,
you had a power failure. When the
power went out, the current time
was stored in the control’s
memory. Then, when the power
was restored, the time of day was
continued.
For example, after a 5-minute
power interruption, your clock
be 5 minutes slow.
To reset the clock, touch the
CLOCK pad. “SET TIME” flashes
and the “slow” time-of-day is
displayed. Enter the correct time
of day by pressing INCREASE or
DECREASE pad.
To check the time of day when
display is showing other
information, simply touch the
CLOCK pad. The time of day
shows for as long as your finger
is on the pad, plus 3 additional
seconds.
To correct the time of day, touch
the CLOCK pad and press
INCREASE or DECREASE pad.