22
GB
- “Auto” and the duration alternately, if programming
is automatic.
3. Press the
button to begin cooking.
4. The oven will begin its preheating phase, the
preheating indicators will light up as the temperature
rises.
5. When the preheating process has finished, a
buzzer sounds and all the preheating indicator lights
show that this stage has been completed: the food
can then be placed in the oven.
6. During cooking it is always possible to:
- modify the temperature by turning the
THERMOSTAT
knob (
manual modes only
);
- set the duration of a cooking mode (
see Cooking
Modes
);
- press the
button to stop cooking. In this case
the appliance stores the temperature modified
previously in its memory (
manual modes only
);
- switch off the oven by pressing the
button for
3 seconds.
7. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from the point at
which it was interrupted, provided that the
temperature has not dropped below a certain level.
Programmed cooking modes which have not yet
started will not be restored and must be
reprogrammed (for example: a cooking mode has
been programmed to start at 20:30. At 19:30 a
blackout occurs. When the power supply is restored,
the mode will have to be reprogrammed).
!
There is no preheating stage for the GRILL mode.
!
Never put objects directly on the bottom of the
oven; this will prevent the enamel coating from being
damaged.
!
Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between
the control panel and the oven door, as well as
towards the bottom of the oven door.In the FAST
COOKING mode, the fan is activated automatically
after ten minutes. At the beginning of the FAST
CLEAN mode, the cooling fan operates at low
speed.
!
Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
When models featuring
LED INSIDE
technology
begin cooking, the LEDs on the door light up for
improved illumination of all cooking levels.
The
button can be used to switch on the light at
any time.
Residual heat indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the “residual heat” bar on the
display lights up to indicate high temperatures
inside the oven cavity. The individual segments of
the bar switch off one by one as the temperature
inside the oven falls.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven,
then keep the SELECTOR knob turned while
pressing the
button for 6 seconds. Once the
restore procedure is complete, a buzzer will sound.
The first time the
button is pressed, the oven will
behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel/door
lock has not been activated, the appliance
automatically reverts to standby mode. The standby
mode is visualised by the high luminosity “Watch
Icon”. As soon as interaction with the machine
resumes, the system’s operating mode is restored.
