FX Title
Description
Parameters & Ranges
Signal
Processing
Vocal Filter
Note: This is a stereo effect with independent L/R signal
processing.
This is a highly customable special auto filter providing a
human-like tone with two voices. Fine tune the knobs
onboard to make your creations.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate knob to set a proper tap divide
value. The default value is 1/4 (no division).
Wave Shape: Selects the LFO modulation
waveform applied to the filter
Vowel 1/2: Selects the filter type (vowel)
Phase: Controls the LFO modulation L/R
phase offset
Depth: Controls the effect depth
Rate: Controls the LFO speed (effect
speed)
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
Mono in,
stereo out
Path Filter 4
This model is a 4-step filter machine for creating synth-
like sounds. Each step features an individual frequency
control, and a rate control sets the sequencing speed.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate knob to set a proper tap divide
value. The default value is 1/4 (no division).
Step 1-4: Controls the filter center
frequency of each step
Rate: Controls the sequencing speed
Sync: Switches Tap Tempo sync on/off
Mono I/O
Path Filter 8
This model is a 8-step filter machine for creating synth-
like sounds. Each step features an individual frequency
control, and a rate control sets the sequencing speed.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate knob to set a proper tap divide
value. The default value is 1/4 (no division).
Step 1-8: Controls the filter center
frequency of each step
Rate: Controls the sequencing speed
Sync: Switches Tap Tempo sync on/off
Pattern
Filter
This model is a pattern filter machine for creating synth-
like sounds. It provides max. 8 steps and 8 different
patterns. A rate control sets the sequencing speed.
You can use Tap Tempo function to control the effect
speed by turning on the Sync switch. When the Sync
switch is on, turn the Rate knob to set a proper tap divide
value. The default value is 1/4 (no division).
Step: Selects the numbers of steps
Patten: Selects from 8 different
sequencing patterns
Rate: Controls the sequencing speed
Shape: Controls the filter width
Reso: Controls the filter resonance
Sync: Switches Tap Tempo sync on/off
Pitch(14)
Analog
Octa 1
This model is a monophonic octaver that creates notes
one octave lower and two octaves lower. Single note
processing and individual wet/dry signal control recreate
the vintage “dirty” analog octave pedal sounds.
Oct 1: Controls the volume of lower
octave (1 oct down)
Oct 2: Controls the volume of higher
octave (1 oct up)
Dry: Controls the dry signal level
Mono I/O
Analog
Octa 2
This model is a monophonic octaver that creates notes
one octave lower and two octaves lower. Single note
processing and individual wet/dry signal control recreate
the vintage “dirty” analog octave pedal sounds.
Effect List
Effect Models List
*
The manufacturers and product names mentioned above are trademarks or registered trademarks of their respective owners. The trademarks were used merely to identify the sound character of the products.
46
DESIGN
INSPIRATION
