Swap
Drag and drop a module on the target module:
Select Swap and choose a target module
by touchscreen or Main Knob:
Or you can press and hold a module until
module edit menu appear:
Copy/Paste
You can copy a module (incl. current effect and parameter settings) and paste it repeatedly.
To paste, press and hold target slot until module edit menu
appear, then select Paste:
To copy, press and hold a module until module edit menu
appear, then select Copy:
Please note:
(1) You need to copy before paste.
(2) The copied module can be used in different patches.
(3) The copied module data will be lost if the unit power is off.
(4) If there already exists a module in target slot, pasting will overwrite existing data. A message will come up to indicate:
(5) If you copied one other module with an existing copy, the previous data will be overwritten.
Delete
Press and hold a module until module edit menu appear,
then choose Delete:
When moving/swapping modules, the red delete area also
appears. So you can also drop the module to the area to
delete the selected module.
In any time, you can press Back button to cancel operation.
Customizing Your Ampero II Stomp
20
DESIGN
INSPIRATION
