Here are some common setups to get the most out of Ampero II Stomp.
Using with your instrument and amp
Plug your instrument into the unit’s input L jack (or L+R if stereo connection is needed), and run a cable (or two) from the output
jack(s) to your amplifier(s). If you have one amp, run the cable from the left output.
For best results, we recommend not to use AMP and CAB modules. You can add a PRE AMP module if you need more tonal
flexibilities.
When using with FX Loop jacks, please remember to add FX Loop related modules (FX SND/RTN/LOOP) or setup input/output
nodes properly.
Suggested Setups
Connecting to your amp's RETURN or Power Amp (Loudster)/FRFR
cabinet INPUT
Connect the outputs to your amp’s FX Loop Return input or power amp input. If you have one amp, run the cable from the left
output.
When using with non-FRFR amps, for best results, turn off the CAB module on Ampero II Stomp.
Sometimes, the AMP module may sound harsh or boomy when running through FX Loop Return jack on some amps. In this case,
use PRE AMP module instead of AMP module.
37
DESIGN
INSPIRATION
