9
7. Identify the Left Upper Body Arm (19), which is
marked with an “L.”
Insert the Left Upper Body Arm (19) into one of
the Upper Body Legs (17).
Next, turn the Left
Upper Body Arm and the Upper Body Leg so
that the wide side of the pivot tube on the
Left Upper Body Arm is above the hexagonal
holes in the Upper Body Leg.
Attach the Left Upper Body Arm (19) with two
M8 x 38mm Button Bolts (58) and two M8
Locknuts (72).
Make sure that the Locknuts
are inside the hexagonal holes. Do not
tighten the Button Bolts yet.
Assemble the Right Upper Body Arm (20)
and the other Upper Body Leg (17) in the
same way.
7
8. Apply a small amount of grease to the sides of
two Wave Washers (88) and two Thrust
Washers (66).
Slide the Left Upper Body Arm (19) onto the
Pivot Axle (16) as shown. Next, slide a Wave
Washer (88) onto the end of the Pivot Axle.
Slide an M8 Small Washer (18) and an Axle Cap
(41) onto an M8 x 19mm Button Screw (56).
Next, slide a Thrust Washer (66) onto the shoul-
der of the Axle Cap. Then, tighten the Button
Screw a few turns into the end of the Pivot Axle
(16).
Make sure that the Thrust Washer
remains on the shoulder of the Axle Cap, and
that the Wave Washer (88) remains on the
end of the Pivot Axle.
Assemble the Right Upper Body Arm (20) in the
same way. Then, tighten both M8 x 19mm
Button Screws (56) at the same time.
8
1
56
18
56
41
41
88
88
16
20
66
18
19
66
19
20
58
58
72
17
17
Hexagonal
Holes
Wide side of
pivot tube
Grease
Grease
All manuals and user guides at all-guides.com
