18
Note: The Speed and Incline buttons will not
function while the fitness test workout is selected. If
your pulse is not detected during the workout, the
letters PLS will flash in the main display. If your
pulse is not detected at the end of any four-minute
level, the fitness test workout will end and the main
display will show a fitness level of 00.
The fitness test workout cannot be stopped tem-
porarily and then restarted. However, the workout
can be stopped at any time with the Stop button.
The main display will then show an estimated fit-
ness level.
6. When the workout ends, remove the key from
the console.
See step 7 on page 13.
THE INFORMATION MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total distance that the walking
belt has moved. The information mode also allows you
to switch the console from miles per hour to kilometers
per hour. In addition, the information mode allows you
to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
you select the information mode, the main display will
show the following information:
The left side of the main
display will show the total
number of hours that the
treadmill has been used.
The center of the main
display will show the total
distance that the walking
belt has moved.
The right side of the main
display will show an E for
English miles or an M for
metric kilometers. Press the
Speed increase button to
change the unit of measure-
ment if desired.
The console features a dis-
play demo mode, designed
to be used if the treadmill is
displayed in a store. While
the demo mode is turned on,
the console will function nor-
mally when you plug in the power cord, switch the
on/off switch to the “on” position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “D” will ap-
pear in the main display while the information mode is
selected. To turn on or turn off the demo mode, press
the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the consoleʼs
sound system, you must connect your MP3 player, CD
player, or other personal audio player to the console
through the audio jack and connect headphones to the
console.
To use the audio jack, locate the audio wire and plug it
into the audio jack labeled IN. Then plug the audio wire
into a jack on your MP3 player, CD player, or other
personal audio player.
Make sure that the audio wire
is fully plugged in.
You must use headphones for the sound system to
function. Plug the headphones into the audio jack la-
beled OUT.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.
