6
1
1.
Orient the Rear Stabilizer (3) as shown. Insert a
Stabilizer Plate (89) into the Rear Stabilizer.
Insert the Rear Stabilizer (3) into the Frame (1).
Tighten the four Stabilizer Set Screws (9)
located in the Rear Stabilizer. Then, attach the
Rear Stabilizer with four 3/8" x 3/4" Button
Screws (65) and four M10 Flat Washers (80).
Tighten two Leveling Feet (47) into the under-
side of the Rear Stabilizer (3).
80
65
65
47
47
80
89
3
1
9
9
To make assembly easier, read the
information on page 5 before you begin.
2. While a second person holds the Seat Frame (8)
near the Seat Carriage (7), connect the seat
pulse wire (A) to the carriage pulse wire (B).
Tip: Avoid pinching the wires.
Attach the Seat
Frame (8) to the Seat Carriage (7) with six M10
x 12mm Button Screws (77).
2
77
77
8
Avoid pinching
the wires
B
A
7
