8
HOW TO MOVE AND LEVEL THE EXERCISE
BIKE
Before moving the exercise bike, make sure that
the power adapter is unplugged.
Note: If a CATV
cable is connected to the exercise bike, it may be
necessary to disconnect the cable if the exercise
bike will be moved far.
Due to the size and weight of the exercise bike,
moving it requires two persons.
While one person
lifts the indicated end, firmly hold the handlebar and
tip the exercise bike forward until it rolls on the
wheels. Carefully move the exercise bike to the
desired location and then lower it to the level posi-
tion.
CAUTION: To reduce the risk of injury, use
extreme caution while moving the exercise bike.
Do not attempt to move the exercise bike over
uneven surfaces.
If the exercise bike rocks slightly during use, turn the
leveling feet under the front and rear of the frame
until the rocking motion is eliminated.
HOW TO ADJUST THE SEAT
To adjust the seat, pull the adjustment latch, slide
the seat forward or backward to the desired position,
and then release the adjustment latch.
HOW TO PLUG IN THE POWER ADAPTER
To use the power adapter, first plug one end of the
power adapter into the receptacle on the front of the
exercise bike. Plug the other end of the power
adapter into an appropriate outlet that is properly
installed in accordance with all local codes and ordi-
nances.
Adjustment Latch
Lift
Here
Lift
Here
Wheels
Handlebar
Power Adapter
Receptacle
Leveling
Feet
HOW TO SET UP THE EXERCISE BIKE
