56
mAh
22.87
V
Storage Charging...
CH1
00:1:44
3.811V
3.814V
1
4
3.812V
3.807V
2
5
3.811V
3.813V
3
6
1.6
W
38
A
LiPo-6S(3.81V) 44%
2
Total Battery
Voltage
Task Status
Output
Current
Capacity
charged
Cell Voltage
Output Power
Operation Time
Battery parameters and
percentage completed
Working Parameters Display
Operation and Setup
14
P6 Smart Charger
Storage Charging
Storage Charging Status : Simple Operation
1. Connect power supply to the charger, wait for the system to complete its self-checking. Con
nect the battery to the charger in the standby interface;
2. After selecting the corresponding channel, short press the speed shuttle key to pop up the
“Task Settings" menu, set the task to “Storage” ; adjust the task parameters, and short
press the speed shuttle key to start the task;
Scroll the speed shuttle key during operation can switch the display information in the lower half of the screen, which are
cell voltage and the operating data ; the cell voltage only be displayed in the mode of balance charging.
3. When the storag
e task is executing, short press the speed shuttle key can pop up the
"Adjust
Task" menu to adjust the storage current ; long press the CH key can stop the current task;
4. Enjoy.
Current Channel