-8
mAh
23.90
V
Discharging...
CH1
00:00:43
3.986V
3.987V
1
4
3.989V
3.988V
2
5
3.988V
3.991V
3
6
-0.2
W
-12
A
LiPo-6S(3.60V) 68%
2
Operation and Setup
12
P6 Smart Charger
Output
current
Total Battery
Voltage
Current Channel
Working parameters Display
Discharging
Operation
Time
Capacity
charged
Task status
Cell Voltage
Discharging Status : Simple Operation
1.Connect power supply to the charger, wait for the system to complete its self-checking. Con
nect the battery to the charger in the standby interface;
2. After selecting the corresponding channel, short press the speed shuttle key to pop upthe
"Task Settings” menu, set the task to "Discharge" ; adjust the task parameters andshor
t
press the speed shuttle key to start the task;
Scroll the speed shuttle key during operation can switch the display information in the lower half of the screen which are
cell voltage and operating data ; the cell voltage can only be displayed in the mode of balance charging;
3. When
the discharge task is executing, short press the speed shuttle key can pop up the
"Adjust Task” menu to adjust the discharge current ; long press the CH key can stop
the current task;
4. Enjoy.
Battery parameters and
percentage completed
Output
power