0.0
mAh
0.00
V
Standby...
CH2
00:00:00
-.---V
-.---V
1
4
-.---V
-.---V
2
5
-.---V
-.---V
3
6
0.0
W
0
A
Name
1
Operation and Setup
09
Working parameters Display
P6 Smart Charger
Standby
Operation
Time
Capacity
charged
Task Status
Output
Current
Total Battery
Voltage
Cell Voltage
Device Name
Current channel
Standby State : Simple Operation
1.Connect power supply to the charger, wait f
or the system to complete its self-checking.
Connect the battery to the charger in the standby interface;
2. In the standby state, the screen is in blue color .At that time, the output current, total
battery voltage ,capacity completed and operation time are all shown as zero .
Scroll the s
peed shuttle key can switch the display information in the lower half of the screen, which are cell voltage and
the operating data.
3. After selecting the corresponding channel, short press the speed shuttle key can pop up
the "Task Settings" menu.
4. Short press CH key can switch the channel ;
5. L
ong press the speed shuttle key to enter the “Charger Settings” menu.
Output
Power