4
Congratulations on your purchase!
Thank you for choosing HOSHIZAKI MODwater
TM
model DWM-20A.
The DWM-20A has the following main characteristics and features:
Multiple Options:
From the left to the right: chilled sparkling water, chilled still water, hot water and cold alkaline water.
Fast:
It fills bottles in seconds.
Child Safe:
Avoids accidental dispensing of hot water (by enabling the Child Safety Switch).
Energy Saving:
It enters stand-by mode – with button lights off, if not frequently used.
Thermal Energy Saving Switch:
Turn the hot water power off if not used daily.
Alkaline Chamber:
Mineral chamber included inside the dispenser.
IN ORDER TO INSTALL DWM-20A DISPENSER, YOU NEED:
1. Installation Kit: (included) a set of items for proper installation of this dispenser (see page 6).
2. Carbon Dioxide Tank (Not included): external to this dispenser (see page 8).
NOTICE
•
Read the instructions in this Manual and retain for future reference.
•
Product failure due to improper installation is NOT covered by the Warranty.
•
The DWM-20A is for indoor use only. Do not install it outdoors.
•
Due to rigorous testing performed by the Manufacturer on each of its products, the DWM-20A may
contain reasonable traces of liquid sanitizing solution inside.
•
SLEEP MODE
. After one hour of inactivity, DWM-20A enters SLEEP MODE to reduce energy
consumption, and all 4 touch buttons are off. To wake it up, just touch and release your finger on any of
the four buttons.
•
SAFETY MODE
. The green and red LED indicators are both blinking while all touch buttons are off. To
prevent accidental dispensing the DWM-20A automatically stops if more than 0.4 gallon (i.e. 1.5L) of
water is dispensed continuously, or if a button is touched for more than 30 seconds without pausing. It
also stops if there is little or no water in the pipeline flowing to the DWM-20A, or there is an internal leak.
To restart it, switch main power off and, after just 3 seconds, turn it on again.
•
ENERGY SAVING
. DON’T NEED HOT WATER OFTEN? Turn Hot Water Switch (RED) off and enable
Child Safety Switch (turn it to the “YES” position). Otherwise, if you don’t dispense hot water at least once
per month, the DWM-20A automatically switches hot water power off, to save energy. To get hot water
again, just touch and hold the red touch button for 15 seconds.
