49
[e] CONTROLLER
1) Remove the front panel.
2) Unscrew the top and bottom of the control box to remove the control box.
3) Push the stoppers at both sides of the controller, and slide the stoppers to remove the
controller.
4) Use a precision flat head screwdriver to loosen the screws and disconnect the wiring
from the controller.
5) To replace the removed parts, reverse the above procedure.
[f] FUSE
1) Open the window panel.
2) Apply a flat head screwdriver to the slot on the fuse holder and turn it counterclockwise.
3) Remove the fuse from the fuse holder.
4) To replace the removed parts, reverse the above procedure.
[g] FORCED DRAIN WATER EVAPORATION PAN
(Forced drain water evaporation model only)
1) Remove the front panel.
2) Remove the side panel of the refrigeration unit.
3) Disconnect the connector at the end of the
evaporation pan lead wire.
4) Put the evaporation pan lead wire and connector
through the wire hole to the outside of the
machine compartment.
5) Remove the four screws at the bottom of the
unit to take off the evaporation pan.
6) To replace the removed parts, reverse the
above removal procedure.
Lead Wire
Connector
Lead Wire
Screw
Evaporation Pan
Pan
Summary of Contents for FTC-120MDA
