6
Setting the On and Off Times
To alter these settings please proceed as follows:-
Press the
SET button
until SET
indicator
is next
to PROG
position
Use + and
- buttons
to adjust
day
Press
ENTER
Use + and
- buttons
to adjust
1st ON
time
Press
ENTER
Press
ENTER
Use + and
- buttons
to adjust
1st OFF
time
Repeat this
process for
2nd and 3rd
settings
Enter the 3rd
OFF time and
the word COPY
is displayed
To follow the copy
route and repeat all
programmed times for
another day go to 1
To set
independent
times for other
days go to 2
Use the + and - buttons to
select day required and press COPY.
‘IN’ is displayed to confirm the copy.
Repeat for other days as required
To transfer to independent times
for other days go to 2 or to finish
programming press the SET button
until the SET indicator is in the RUN
position
1
Press ENTER. Use the + and - buttons
to select the day required and
press ENTER. Set 1st, 2nd and
3rd times as before. To repeat for
other days go to 2, to copy go to 1
To finish programming press the SET
button until the SET indicator is in
the RUN position
2
1st ON
1st OFF 2nd ON 2nd OFF 3rd ON
3rd OFF
6.30AM 8.30AM 12.00PM 12.00PM 4.30PM 10.30PM
Default Time settings
The default time settings shown above are preset at the factory
NB. The factory default settings for the 2nd ON/OFF times are both
set at 12:00pm (midday) which cancels this ‘ON’ period giving 2
ON/OFF periods for the day. If a midday ‘ON’ period is required set
the 2nd ON and OFF times accordingly. If not press ENTER twice.