background image

www.redbackaudio.com.au

Redback® Proudly Made In Australia

1

Redback® A 4500C

 Evacuation Timer with Network Access

IMPORTANT NOTE: 

Please read these instructions carefully from front to back prior to installation. 

They include important setup instructions. 

Failure to follow these instructions may prevent the unit from working as designed.

 

User manual revision number: 1.1 04/08/2022

Operating Manual 

A 4500C

 Alert/Evacuation Controller and 50 Event Timer

Optional  Accessories 

A 2078B 

Alert/Evac/Cancel Remote Wall Plate (Hard Wired)

A 2081 

Alert/Evac/Chime/Cancel Remote Wall Plate (Hard Wired)

A 4578 

Alert/Evac/Cancel Remote Wall Plate (U/UTP Cat5)

 

A 4579 

Timer Isolate Remote Wall Plate (U/UTP Cat5)

A 4581 

Alert/Evac/Chime/Cancel Remote Wall Pl

ate

 (U/UTP Cat5)

 

A 4581V 

Alert/Evac/Chime/Cancel Remote Wall Pl

ate

 (U/UTP Cat5)

 

A 4564 

Emergency Paging Microphone Console (U/UTP Cat5)

A 2078B

 Remote Plate

A 4578

 Remote Plate

A 4581

 Remote Plate

A 2081

 Remote Plate

A 4581V

 Remote Plate

A 4564

 Paging Console

A 4579

 Remote Plate

IMPORTANT NOTE: 

These instructions are only suitable for A 4500C models or A 4500B 
models which have been upgraded with the A 4500C firmware.   
Firmware updates are available from 

redbackaudio.com.au

Summary of Contents for A 4500C





















Reviews: