Eaton AT2P Technical Data Manual Download | Manualshive

Page: 1 / 12

background image

AT2P
Digital Quartz Timer

Specifications

Technical Data

•

Direct mounting onto 35mm din rail.

•

Optional wall surface-mounting set for 2-3 module

spacing

•

BS5584

•

Fully programmable 2 channel 2 modules.

•

Occupying 2 x 18mm modules

Eaton Electric Limited
Reddings Lane
Birmingham, B11 3EZ
United Kingdom
Tel: 08700 545 333
Fax: 08700 540 333
www.eatonelectrical.com

2007 Eaton Electrical Limited
All rights reserved

May 2007

Ref. Description

AT2P Digital Quartz Timer Fully Programmable , 2 module, 2 channel

Ordering Information

Details

Dimension (H x W x D) mm        45 x 36 x 60
Distributor cut-out mm               46 x 36
Weight g (approx.)                     170
Switching capacity at                 230 V AC
-ohmic load (VDE, IEC)             16A/250 V AC
-inductive load cos

φ

0.6 2,5 A/250 V AC

-glow lamp load                          1000 W
Switching contacts                     1 or 2 changeover
                                                    contacts
Running accuracy                      + 2.5s/day at + 20

0

C

Running reserve type                 Lithium
Running reserve                         150
Shortest switching time              1 minute
Programmable                            every minute
Memory locations                       20/30
Switching pre-selection               yes
Hand switch                                Automatic-pre-selection
                                                     Fix ON

Switching state display               yes
Block formation of weekdays     fixed assignment
Summer/winter time switchover automatic/freely
                                                    selectable
Connection type                         c/- screw
                                                     terminals
Ambient temperature                 -25

0

C … + 55

0

C

Led sealable yes

1
2
3
...
»

Summary of Contents for AT2P













Reviews:

No comments

Related manuals for AT2P

Brand: Danfoss Pages: 2

Brand: UPM Pages: 3

TRACEABLE BLUE-STEEL 5128

Brand: Novatech Pages: 2

Brand: X10 Pages: 16

Brand: Trevi Pages: 8

Brand: Yudo Pages: 13

Brand: brennenstuhl Pages: 2

Brand: Danfoss Pages: 2

Brand: RainPoint Pages: 22

Brand: Woods Pages: 2

950-1067 RELAY-TIMER KIT 8504053 REV 4 0996

Brand: TJERNLUND Pages: 4

Brand: Mio Pages: 2

Time Tracker mini

Brand: Learning Resources Pages: 4

All American Scoreboards MP-7499

Brand: Everbrite Electronics Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands