CLOCK SETTING
1
*
*
4
2
5
6
7
8
Press the
key to begin the clock setting. The
symbol will appear.
Before proceeding with the clock setting and programming for the first time,
press the
key.
RESET (
)
Select the current day using the
or
key.
Press the
key
Select the current hour using the
or
key
Press the
key
Select the current minute using the
or
key
9
10
3
Press the
key
Set the seconds to zero by pressing either the
or
key
Press the
key to finish the clock setting
To set the clock, first check to see that the display is
in the clock mode (
). If the display does not
show
, press either the
or
key until
the clock mode (
) is displayed.
For proper operation, ensure the clock is set to the correct time.
GETTING STARTED
button placements
display
1
2
3
4
ON/OFF
– manual on/off control
RESET (
)
– reset
5
CD
– activates countdown timer
6
RANDOM
– activates random function
– scrolls through selections
6
SET
– activates set function
To toggle between 12 or 24 hour format, press the
key during clock setting
SET
SET
RANDOM
SET
SET
SET
If you are using the 12 hour format and you are setting an afternoon or evening time,
ensure that the
symbol appears on the left.
PM
Programmable Digital Timer
SE-11P
OWNER’S
M A N UA L
Please take the time to read
and understand this manual
so you can begin to enjoy
the convenience and energy
saving benefits this product
has to offer.
FEATURES
!
!
!
!
!
!
14 ON settings /
14 OFF settings
Programs can be set to
operate on a specific day,
Monday to Friday,
Monday to Saturday,
Saturday and Sunday, or
everyday of the week
Countdown timer
Random function
12/24 hour clock
15A, 1800W (resistive);
600W (tungsten)
R
R
SET
PAGE 1
PAGE 2
PAGE 3
ON/OFF
RANDOM
PROG
CD
SET
R
Set
Weekday indicator
Random
Time display
Clock
Countdown
Program
ON/OFF indicator
Program disable
DST indicator
PM indicator
This timer allows you to disable any particular program, or if you have more than one
program set, you can disable all of them at once using the
function.
master disable
PROGRAM DISABLE
To disable a single program, select the program of choice by using the
or
key.
When a program is disabled, the time settings are stored in memory so that when you
re-enable the programs, the timer will resume with the same programs as before.
SINGLE PROGRAM DISABLE
1
NOTE: You will need to disable both the ON and OFF setting of the
program to completely disable that particular program.
2
Press the
key
3
Press the
key to disable the program. An
symbol will appear to
indicate that the particular setting has been disabled.
X
4
Press the
key 3 times to exit.
EXAMPLE:
You wish to disable PROGRAM 2 only.
The
symbol will appear and the day(s) will be blinking.
PAGE 9
SET
ON/OFF
SET
If this was the ON setting that was disabled, now proceed to disable the OFF setting
of the same program to completely disable that particular program; or if you had
disabled the OFF setting first, now go to the ON setting.
PROGRAM DISABLE
Select the OFF setting of the same program by using the
or
key.
1
2
Press the
key
3
Press the
key to disable the program. An
symbol will appear to
indicate that the particular setting has been disabled.
X
4
Press the
key 3 times to exit.
EXAMPLE:
You wish to disable PROGRAM 2 only.
The
symbol will appear and the day(s) will be blinking.
You have now successfully disabled PROGRAM 2.
*
To
the particular program, repeat the above steps for the ON and
OFF settings. The
symbol will
indicating that the program has
been re-enabled (returned to normal).
re-enable
X
disappear
PAGE 10
ON/OFF
SET
PROGRAM DISABLE
To perform the
, go to the clock mode (
) by using the
or
key.
master disable
MASTER PROGRAM DISABLE
1
2
Press the
key
3
Press the
key to disable the program. An
symbol will appear to
indicate that
programs have been disabled.
X
all
4
Press the
key 4 times to exit.
The
symbol will appear and the day will be blinking.
If you have more than one program set, and you wish to disable
of them at once,
you can do so by using the
function.
all
master disable
*
To
the programs, repeat the above steps. The
symbol will
indicating that all the programs have been re-enabled (returned to
normal).
re-enable
X
disappear
You have now successfully disabled ALL programs.
PAGE 11
SET
SET
ON/OFF
6
LED
– lights up when the power is ON
7
6
3
ON/OFF
RANDOM
PROG
CD
SET
R
2
4
5
1
7
