Seed flow monitoring with half-width shut-off
If the switched off section is equipped with
sensors for seed flow monitoring, these would
indicate corresponding alarm messages in the
terminal.
You can either switch off seed flow monitoring,
or unplug the sensors and correct their number
in the machine configuration.
Please note: The sensor numbers can also be
entered into the tram line list. In this case this
list would also need to be updated.
¾
Switch off the desired section in the terminal.
Both wings will be adjusted - the display
flashes.
¾
The seed and fertiliser quantity is halved.
¾
For the drilled area counter the working width
is automatically halved.
¾
Once the two valves are in right or left switch-
ing position, the switched off half width disap
-
pears from the display.
NOTE
¾
In spite of the status display on the terminal,
visual inspection is necessary to check wheth-
er the half-width flap is at the correct position.
The positioning motors must each be in their
end position.
¾
Check the function of the half-width shut-off in
the field. Check the air escape at the coulters
as well as the seed placement while the fan
is running.
Seed flow monitoring
Seed flow monitoring is automatically switched
off.
38
MF
