Parking
DANGER
Risk of accident due to insufficient stability
¾
Park the machine only with empty hopper.
¾
Park the machine on a flat, paved surface.
¾
Always put both supports down before un-
hitching!
NOTE
Clean the machine and prepare properly before
parking it for an extended period; see chapter
Care and Maintenance.
1. Position the machine at a suitable location
and set the tractor brake.
2. Position both supports down and secure them
with cotter pins:
3. Lower the machine to the ground.
4. Unplug the lighting and ISOBUS and hook
on the bracket.
Attach the cover caps if so equipped.
5. For tyre packer auxiliary equipment: Posi-
tion the wheel chocks under the side of the
packer wheels pointing to the downward
slope. Attach the wheel chocks to the two
outer packer wheels:
6. Disconnect the hose assembly for the feed
pipes at the location intended.
Disconnect the wiring, depending on the con-
figuration.
7. Relieve and unhitch the upper link.
8. Relieve the tractor link arms.
9. Release the securing device of the catching
hooks.
10. Lower the tractor link arm.
11. Clean the metering unit.
12. Close the hopper cover.
13. Store the terminal in dry conditions.
29
