![horsch Partner 2000 FT Operating Instructions Manual Download Page 32](http://html1.mh-extra.com/html/horsch/partner-2000-ft/partner-2000-ft_operating-instructions-manual_2164107032.webp)
1
3
4
2
Front hopper connected in transport position
1 Upper link
2 Tractor link arm
3 Hydraulics/Lighting/ISOBUS
4 Supports (turned upward)
Transport position
WARNING
Danger of road accidents caused by losing the
machine or machine parts.
Before driving off:
¾
Clean all thrown up soil off the entire machine.
¾
Check function of lighting system.
¾
Lock the control units mechanically or electri-
cally, depending on the version, during trans-
port travel. Never switch them to the floating
position.
¾
Check all interlocks before starting to drive.
¾
Check whether all securing elements of the
connection are in place and set correctly.
¾
Check components of the connection for wear.
Position
Control unit
Floating position
Locked position
Supply
Three-point hydraulics
Fan
Position of control units during transport travel
WARNING
Danger of traffic accidents
¾
For front packer auxiliary equipment:
Never drive on the road with lowered front
packer.
NOTE
¾
Make sure before driving on public roads that
the machine meets all respective applicable
national road traffic regulations.
¾
The field of vision in front of the tractor is limited
by the front hopper.
Do not raise the front hopper higher than
necessary.
Observe the respective applicable national
regulations for the field of vision.
Make the following additional adjustments be-
fore road transport:
1. Lift the machine.
2.
Switch off the E-Manager.
3. Inspect the lighting.
28