horsch Maestro 16 SX, Operating Instructions Manual

Page: 78 / 158

8 | Drill unit
78 60026387 • 01 • 03/2021 • en
Always adjust the same gap width on all press rollers.
1. Loosen the screw, take off press roller and spacer bushing (c).
2. Assemble spacer bushing and press roller in reverse order.
3. Tighten the screws with 200 Nm.
Rubber press rollers –
wide version
• Width 50 mm
• Gap 7 mm
• suitable for sorghum and sugar beets
• recommended on very light soils
Rubber press rollers – wide version
Displacing the axle
In case of blockage caused by stones or harvest residues, one of the two press
rollers can be moved forward.
The offset of the press rollers reduces the risk of blockage.
Ø
For this purpose remove the press roller and fasten the axle in the free hole.
1
2
1 Without offset
2 With offset
Rubber narrow / finger
press wheel
• Compaction through coulter discs and depth guide rollers are removed.
• recommended on heavy soils
• not for shallow seed (e.g. sugar beets)