horsch Maestro 16 SX, Operating Instructions Manual

Page: 51 / 158

Operation | 6
60026387 • 01 • 03/2021 • en 51
In the drill controls one can set a delay for seed metering after fertiliser metering so
that seed and fertiliser will be in the ground at the same time. The delay is factory-
set to “0”. The delay can be set in 0.1 second steps up to a value of max. 2 seconds.
Once use in the field has been started a warning tone will sound from the start of
fertiliser metering to the start of single grain metering. This gives the driver the pos-
sibility to check the delay.
Due to the delay the machine must be lowered earlier.
For settings, see the operating instructions of the drill controls Setting – Seed offset .
Position of control units
during use in the field
Position
Control unit
Floating posi-
tion Locked position Supply
Hydraulic valve block
Fertiliser fan
Fan 3
Filling auger