horsch Maestro 16 SX Operating Instructions Manual Download Page 48

Page: 48 / 158

6 | Operation

60026387 • 01 • 03/2021 • en

Lock valve closed

4. Turn on the drill controls.

5. Unfolding the machine. Refer to the drill controls operating instructions.

6. Open the lock valve on the drawbar.

7. Adjust both support wheels to the required height by means of the screw ad-

justments and secure with locking nuts:

6.3.2 Folding in

WARNING

Risk of accident through uncontrolled machine movements

All fans must be turned off during the entire folding process.

Close the lock valve on the drawbar before each folding process.

Never switch the control unit for the folding function to the floating position
before the folding process is completed (machine completely folded or unfol-
ded).

CAUTION

Damage to the machine caused by collision.

Fold down the railing before folding up the machine!

1. Connecting the machine.

2. Turn off all fans.

3. Close the lock valve on the drawbar:

Summary of Contents for Maestro 16 SX































































































































































Search results

Summary of Contents for Maestro 16 SX

Reviews:

Brands by name

Popular brands

horsch Maestro 16 SX, Operating Instructions Manual

Search results

Summary of Contents for Maestro 16 SX

Reviews:

Brands by name

Popular brands