8. Couple the upper link, secure the bolt with
the cotter pin. Use the position fitting for the
respective tractor:
9. Lock the tractor link arms against swinging
sideways.
10. Connect the hydraulic lines, see chapter
Hydraulics
.
11. Connect the lighting system.
12. Connect the ISOBUS. Refer also to the
E-
Manager
and
Partner FT
operating instructions.
13. Plug on the hose assembly from the front
implement and tighten the hose clamps:
14. Check before starting to drive whether the
machine has been properly connected and
secured.
Transport position
WARNING
Danger of road accidents caused by losing the
machine or machine parts.
¾
Check all interlocks before starting to drive:
•
Upper/tractor link arm
•
Protective features
•
Deflector rail
•
Depth setting
•
Propshaft
¾
Switch the control units to the locked position
during transport travel and interlock them
mechanically or electrically, depending on
the design. Never switch them to the floating
position.
¾
Check whether all securing elements of the
connection are in place and set correctly.
¾
Check components of the connection for wear.
WARNING
Risk of accident through freely rotating rotors
•
Never switch on the PTO-shaft while the ma-
chine is lifted (transport position).
NOTE
¾
Make sure before driving on public roads that
the machine meets all respective applicable
national road traffic regulations.
Make the following additional adjustments be-
fore road transport:
1. Lift the machine.
2. Set the working depth of the power harrow
to step
T
; see sections
Settings
.
3. Fold the machine in completely, see section
Folding
.
4.
Switch off the E-Manager.
31