horsch 34362342, Operating Instructions Manual

Page: 37 / 67

Machines with tractor link arm connec-
tion and manual depth setting
1. Lift out the machine.
2. Remove clips from position (1).
1
2
3. Lower the machine completely.
4. Place one yellow and one clip each in position
(2) (overall thickness of clips: 26 mm).
5. Lift the machine completely.
6. Fold the machine.
7. Switch all control units to the locked position
and secure against unintentional actuation.
Machines with three-point hitching
1. Lower the machine completely.
2. Fill positions (1) and (2) with clips. Place at
least one yellow and one blue chip at position
(2) (overall thickness of clips min. 26 mm).
3. Lift the machine completely.
4. Switch all control units to the locked position
and secure against unintentional actuation.
Position
Control unit
Floating position Locked position Position control
Folding
ed Nov 06
Datum Entw. Dateiname Zeichnungsnummer Maschine Zeichnung
Aufkleber
00110681 - 7
00110681 00110682
00110683 00110684
00110685 00110686
00110687
Lifting/lowering (undercarriage)
ed Nov 06
Datum Entw. Dateiname Zeichnungsnummer Maschine Zeichnung
Aufkleber
00110681 - 7
00110681 00110682
00110683 00110684
00110685 00110686
00110687
Tractor link arm
Depth setting
Border disc
Position of control units during transport travel
33