47
▋
Balance【BALANCE】
▋
▋
Function▋Explanation
The “BALANCE” functions is used to correct for individual servo characteristic to equalize the
travel of each control. This is useful when using Six Ailerons, Four Ailerons, Dual Elevators, and
Dual Flaps. It is useful when more than two servos are used per control surface.
▋
▋
Setting▋Method
The initial Balance setting points are three points set to the slow, center and high sides. To add
a point, set the stick to the desired position and press the “ADD” key. In the situation where the point is set
to be deleted, this should be carried out using the “DEL” key. For the adjustment, Set the point by stick and
change the value by scrolling the dial for “IN” or “OUT”.
▋
▋
For▋Airplane
Setting can be achieved for the below Wing types.
Flaperon (FLAPERON), Dual Aileron (DUAL AILE)
It is possible to correct the right Aileron’s servo movement, based on the left Aileron’s servo movement.
Tail-less Wing (DELTA)
It is possible to correct the right Aileron’s servo movement based on left Aileron’s servo movement.
※ The actual meaning of “DELTA” is a defined wing shape, and not a tailless airplane. However, JR does call tailless
airplanes deltas (eg the F-102 or Dassault Mirage III).
Four Aileron airplane (4-AILE)
It is possible to correct the outside two Aileron’s servo movement and inside two Aileron servos based on the
left outside Aileron servos and inside Aileron servo movement.
Six Aileron airplane (6-AILE)
It is possible to correct the Outside Left aileron (LAL3) as a base, Middle Left aileron (LAL2),Inside Left
aileron(LAL1), Outside Right aileron(RAL3), Middle Right aileron (RAL2)and Inside right aileron(RAL1) servos.
V-tail (V TAIL)
It is possible to correct the right V-tail ’s servo movement based on the left V-tail’s servo movement.
Dual Elevator (DUAL ELEV)
It is possible to correct the right elevator’s servo movement based on the left elevator’s servo movement.
Four Elevator (4-ELEV)
It is possible to correct the Outside Left Elevator(LEL2) as a base, Inside Left Elevator(LEL1),Outside Right
Elevator(REL2) and Inside Right Elevator(REL1)servos.
Dual Rudder (DUAL RUDD)
It is possible to correct the right rudder’s servo movement based on the left rudder’s servo movement.
Dual Flap (DUAL FLAP)
It is possible to correct the right flap’s servo movement based on the left flap’s servo movement.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Function▋List
XG14English.indd 47
2013/07/16 16:40
