49
▋
Flap▋Rate【FLAP▋RATE】
▋
▋
Function▋Explanation
This function sets the maximum up and down movement of the flap control surface angles
independently in each Flight Mode when using the Flap Lever.
It is also possible to set the flap amount against Aileron movement.
▋
▋
Setting▋Method
Initially, it is set at 0% (default for each flight mode). To change this setting, adjust the numeric value. The
switch for this function is initially set as Flap lever on the side of the transmitter. This can be changed using
the Device Select menu.
▋
▋
To▋set▋the▋travel▋amount▋on▋FLAP,▋Select▋"FLAP"
▋
▋
To▋set▋the▋Flap▋operation▋on▋the▋Aileron,▋Select▋"FRPN"▋or▋the▋"FRP2"
※ In case of using Four Aileron, it is also possible to pair them independently and set as following.
①
R-AILE1(Right Aileron 1), L-AILE1(Left Aileron 1) ・・・・・ Setting item: FPRN
②
R-AILE2(Right Aileron 2), L-AILE2(Left Aileron 2) ・・・・ Setting item: FPR2
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更
スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
When operating a competition aircraft where there is concern regarding mis-operation of the Flap switches or
levers, set the outputs to “0”. Flap operation can still be carried out using other mixing – for example using the
camber system.
▋
▋
Caution▋Note
Actually operate the servos and carefully confirm the settings before flying.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Function▋List
Flight Mode
Flight Mode
XG14English.indd 49
2013/07/16 16:40