25
▋
Reverse▋Switch【REVERSE▋SW】
▋
▋
Function▋Explanation
This function reverses the servo operating direction (pulse change direction) of each channel.
▋
▋
Setting▋Method
Rotate the dial to move to and select the channel that you wish to change (inverse display).
Then press the dial to select the rotation direction. “NORM” is the normal direction and “REV”
is the reverse direction. Actually operate the servos and carefully confirm the settings before
flying.
※ The channel names on the screen will differ according to the model type.
Function▋List
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
This screen is for Helicopter type.
Direction of Selected Channel
Select the channel.
IMPORTANT NOTICE
In the situation where the reverse switch setting
has been changed the Fail Safe has been set, and
this will after affect the Fail Safe operation, it will
operate in the opposite direction to the condition
that was set.
Accordingly, in the situation where the Fail Safe
has operated after the throttle channel has been
set to reverse by setting the reverse switch in the
transmitter, the servo will be set to the Full High
side, which will be extremely dangerous.
After finishing the transmitter settings, be sure to
implement the Fail Safe settings (Match the stick
to the position that you wish to set and press the
Memory key), and
be certain to carry out operation
confirmation.
(Switch off the transmitter once, and
check whether the servo movement reaches the
correct position.)
XG14English.indd 25
2013/07/16 16:39
